Meters &Testers

The VoltSafe is a unique instrument, being a voltage detector and a non-voltage indicator. It is a non contact device and is therefore ideal for quick tests without any connection disruption.
The detector is always activated and gives a (red) optical and an acoustical siganl upon the presence of AC voltage. The VoltSafe can be set manually to indicate a voltage free surrounding by a green LED in the partly transparent tip. This is a self-test function and indicates no voltage within the detecting range. However, if the voltage ís detected, the green LED will change into a red LED and an acousic signal is given.
With the range of 100 - 1000 V AC and the acoustic signal of 65 dB, the VoltSafe is a universal instrument and can be used in many service purposes.

The VoltPointer has equal functionality to the VoltSafe; it is a voltage detector ánd a non voltage indicator.It is a non contact device and is therefore ideal for quick tests without any connection disruption.
The detector is always activated and will automatically give a (red) optical and an acoustic signal upon the presence of voltage. The VoltPointer can be set manually to indicate a voltage free surrounding by a green LED in the partly transparent tip.

Inside the tip of the VoltPointer, a bright LED is positioned which can l be switched on manually for use as a (small) flashlight. This makes the VoltPointer very suitable for use in poorly lit locations such as switch boards, distribution boxes, etc.

The EazyVolt II is a reliable and safe 4-in-1 automatic voltage tester up to 690 V, a resistance tester, a continuity tester and is able to indicate phase rotation by 2 poles.
Unique is the full LCD display with bargraph and backlight. The tester is integrated with a torch for testing in places with less lighting. The probe can be connected to the housing firmly.
IP-Protection IP64/IP65 pending
Over voltage category CATIII / 1000V - CAT IV / 600V
Standards NEN EN 61010-1, EN 61243-3, EN 61557-7
Probe tips 2 mm. en 4 mm. with thread
Drop proof 1 meter
Test leads 1,2 meter
Dimensions 240 x 56 x 24 mm.
Weight + 230 gram (incl. batteries)

The MM44 gives a choice of ranges and is suitable for most applications. With a basic accuracy of 0.8%, the meter has ceramic fuse protection and a wrong range bleep to prevent misuse. It has a continuity bleep and can measure capacitance & frequency and performs diode, transistor and logic tests. Our most popular multimeter.

The ISO 5000 Electronic Insulation Resistance tester has a measurement range of 500Kohm tp 50Gohm in four voltage ranges 500vdc, 1000vdc, 2500vdc and 5000vdc..
designed for measuring resistance in cables, motors, machines, transformers & ground cables etc.
The unit comes in a sturdy carry case and is powered by 4 x 1.5v batteries.
The tester also measures AC and DC volts up to 600v